LINK BELT CSEB22655H Cartridge Unit Bearings

Dimension C:2.3750 in; Shaft Diameter D:1 1/4 in; Dimension S1:1.0000 in; Pin Dia BS:1/2; Diameter G:0.5313 in; Width A:1.2188 in; Weight W:1.50 lb; Dimension F:0.5625 in; Insert Bearing IB:ZMaRC; Dimension B:6.1875 in;

Basic dynamic load rating C:13268 kN; Ba min.:20 mm; D:980 mm; d3:670 mm; Calculation factor Y2:2.9; B2:80 mm; Fatigue load limit Pu:1220 kN; B1:447 mm; db min.:566 mm; da max.:670 mm;

b:22.3 mm; D1 ≈:723 mm; B:248 mm; Basic static load rating C0:12000 kN; da min.:512 mm; d2 ≈:560 mm; Fatigue load limit Pu:780 kN; Calculation factor Y1:2.3; Limiting speed:170 r/min; da max.:560 mm;

D:52.0000 mm; Accessories:Two Seals; Oil Speed Rating n2:11000 rpm; B:22.20 mm; Grease Speed Rating n1:8000 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:14000 N; Sealed Speed Rating n3:8000 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:20800 N;

Width C:21 mm; D:80.0000 mm; B:56.00 mm; Basic Static Radial Load Rating Co:8500 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating:26500 N; d:35.000 mm; Grease or Oil Speed Rating n1:5000 rpm;

B:36.50 mm; Sealed Speed Rating n3:5000 rpm; Basic Static Radial Load Rating Co:43000 N; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6700 rpm; d:40.000 mm; Accessories:No Shield, no Seal,; Basic Dynamic Radial Load Rating C:60500 N; D:90.0000 mm;

Housing:SAW 518; P90°:60.9 kN; A1:98.425 mm; J max.:295.275 mm; Taconite seal:TER 188; ba:47.625 mm; Stabilizing ring:SR-18-15; A2:206.375 mm; Appropriate attachment bolt size G:0.625 in; H:192.484 mm;

Attainable speed for grease lubrication:30000 r/min; Static axial stiffness, preload class B:35 N/µm; Fatigue load limit Pu:0.193 kN; d2:35.6 mm; a:9.7 mm; Calculation factor f:1.08; Static axial stiffness, preload class A:26 N/µm; B:9 mm; d:30 mm; D:47 mm;

ba:61.913 mm; Cap bolt recommended tightening torque:400 N·m; End plug (suffix Y):EPR 14; Mass pillow block:49.9 kg; Adapter sleeve assembly:SNW 124x4; Appropriate attachment bolt size G:0.75 in; P150°:66.7 kN; S:4.763 mm; P60°:185 kN; P120°:72.5 kN;

Grease Speed Rating n1:6100 rpm; Oil Speed Rating n2:10000 rpm; Fillet Radius rb:0.024 in; Fillet Radius ra:0.06 in; d:2.625 in; B:0.6875 in; Basic Static Radial Load Rating Co:39000 N; Basic Dynamic Radial Load Rating C:42300 N; D:4.1250 in;

Oil Speed Rating n2:4500 rpm; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; B:39.00 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields; d:80.000 mm; Fillet Radius ra:2.00 mm; D:170.0000 mm; Basic Static Radial Load Rating Co:86500 N;

P60°:92.5 kN; Pa:23.6 kN; Da:170 mm; Housing:FSAF 316; End plug (suffix Y):EPR 8; Lock nut:AN 16; P150°:30.7 kN; Cap bolt, SAE grade:8; L:361.95 mm; R1:63.5 mm;

Grease Speed Rating n1:14000 rpm; d:12.000 mm; B:19.1 mm; Basic Dynamic Radial Load Rating C:11700 N; Oil Speed Rating n2:18000 rpm; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Basic Static Radial Load Rating Co:6800 N; Fillet Radius ra:1.00 mm;

RG:1/4 NPT; R1:46.038 mm; h:28.575 mm; S:3.175 mm; Max. speed for PosiTrac Plus seal:2350 r/min; Pa:6.94 kN; P60°:75.6 kN; Appropriate attachment bolt size G:0.5 in; End plug (suffix Y):EPR 7; Housing:FSAFS 515;

Basic static load rating C0:1930 kN; Fatigue load limit Pu:190 kN; Da max.:94 mm; Reference speed:850 r/min; Minimum axial load factor A:0.298; d1:180 mm; r1,2 min.:2.1 mm; H:58 mm; d:85 mm; D1:88 mm;